Recommended Solutions to Most Common Problems on Cherry Mobile Flare S [Part 1]

Advertisements

"I've stumbled upon certain forums over the Internet, particularly those talking about different smartphone problems. And from there, I found out a number of local smartphone owners asking for help/solutions to various problems they've encountered with their devices, including Cherry Mobile Flare S. Nevertheless, only few have replied for solutions and workarounds to their relayed issues via forum posts. 

Seeing these rising needs for mobile technical support over the web, and in line with our goal to make SiatonDaily.com a one-stop site for online info-seekers, I finally came up with a notion to offer you this content." -- Author

This article tackles the most common problems that may be encountered by owners of Cherry Mobile Flare S smartphone and the best possible solutions/workarounds to deal with each of the issues transpiring on the device.

Important notes:

To avoid encountering any of the following issues on the Flare S handset, do not store too much data in it as this may affect the phone's performance. Keeping the device's battery fully charged is also recommended to avoid performance issues when using the handset.

Problem 1: Flare S is not turning on.

In case the phone does not switch on, try these workarounds:

A. Perform a soft reset on the device. These are the steps on how to soft reset or power cycle your phone.

* Press and hold the End button until the image prompts on the screen.

* Verify if the phone has enough power. Check the battery charge percentage/level before moving on to further troubleshooting.

* Try to remove the battery from the phone. Wait for at least 30 seconds and then switch the phone on again.

Problem 2. Flare S is not responding for several minutes.

In some instance, the phone does not respond for certain period of time for some reasons. Please read on to learn on the recommended workarounds to deal with this issue:

We recommend power cycling (soft reset) of the device in the case. The process is akin to prior procedures.

* Press and hold the End button.

* Remove the battery with the device still on.

* Wait for 30 seconds.

* Place the battery back on the device.

* Turn on the device.

Problem 3. Flare S turns off by itself.

In case you notice your phone turns off by itself, verify if the keypad is locked when left unused or idle for quite some time.

If this problem occurs after you download and install any third-party application, we suggest you to uninstall the app, as it is likely the one causing the problem. Sometimes, software incompatibility would cause similar problem to occur on the device.

And don’t forget to check the battery level and ensure it is sufficiently charged.

Problem 4. Flare S battery will not charge.

Battery charging problem with Cherry Mobile Flare S is often associated with a displace battery or the battery is not properly inserted into the device. In this regard, verify if the battery is in the right position/place.

Also make sure the battery is not fully drained. For some reasons, the phone won't charge if the battery is not fully drained.

We also recommend using only Cherry Mobile approved batteries and chargers for your device to avoid having such problem. Remember to connect the charger if and only if the battery is inserted.

Finally, verify if the charger connector is properly plugged in or connected to the mobile phone and/or power source.

Problem 5. Flare S standby time is too short.

Standby time issues on Cherry Mobile Flare S are often associated with messed up settings or system configuration of your local network service provider. A recommended workaround to deal with this problem is to turn off the phone in certain area where signal is weak.

The problem may also be tied to a faulty battery, in which the battery needs to be replaced.

More recommended solutions and workarounds to other common problems on Cherry Mobile Flare S will be posted in this site a little later. Please keep posted.

Categories: Tech-Guides